Debem Barrel Pump
The Italian company Debem for more than 4 decades barrel Debem pumps, diaphragm pumps and centrifugal pumps The company has exported its products to many countries due to its high quality and appropriate services, and is one of the well-known winners in Iran.
Debem barrel pump is a TR model made in Italy, which consists of a long tube with an open impeller at the end. This impeller is connected to an electric or pneumatic (pneumatic) motor by shaft and coupling. Debem TR barrel discharge barrel pump is used vertically and immersed in fluid. Drying of the pump or the presence of air can damage the internal bushing and pump shaft.
These pumps are portable and suitable for pumping corrosive fluids and work by immersion in fluid.
Technical specifications of Debem barrel pump model TR
Debbie TR model barrel pumps are produced in polypropylene (PP), stainless steel 316 (AISI 316) and Kainar (PVDF) and body length (tube) 700, 900 and 1200 mm. This series of debum barrel discharge pumps is supplied with electric and pneumatic motors that pump up to 90 liters per minute and 15 meters in the electric sample and up to 70 liters per minute in the pneumatic sample and 9 meters in the liquid sample.
Features of Dabem barrel pump model TR
- Design and layout of Italy
- Low weight and easy transport
- High resistance to corrosive fluids
- No mechanical seal
- Easy installation
- Suitable for viscosity up to 900 cm
- Maximum flow of 90 liters per minute
- Ability to adjust the flow rate in the pneumatic motor version
How to name a Debem barrel pump
Engine type | Body length (tube) | Pump shaft material | Pump body material | Pump model |
Electric – EL
Pneumatic – PN |
700 – 0700 mm
900-900 mm 1200-1200 mm |
Hastelloy – H
Stainless Steel (AISI 314) – S |
Polypropylene (PP) – P
Kainar (PVDF) – F Stainless Steel (AISI 316) – A |
TR |
Technical specifications of all types of Dabm barrel pump model TR
Polypropylene body – TRP | Kainar Body (PVDF) – TRF | 316 stainless steel body (AISI 316) – TRA | |
Input size | 42 mm | 42 mm | 42 mm |
Output size | 25 mm | 25 mm | 25 mm |
Operating temperature | 3 to 65 degrees Celsius | 3 to 95 degrees Celsius | 3 to 95 degrees Celsius |
Weight | 1.4 – 1.7 kg | 1.6 – 1.9 kg | 4.3 – 5.3 kg |
Pump body material | Polypropylene (PP) | Kainar (PVDF) | Stainless Steel 316 (AISI 316) |
hot sex | Hostel or steel 316 | Hostel | Stainless Steel 316 (AISI 316) |
Butterfly material | ECTFE | ECTFE | ECTFE |
Inlet material (suction) | Polypropylene (PP) | ECTFE | ECTFE |
Sealing gasket material in contact with fluid | Whiteon | Whiteon | Whiteon |
Tube length | 700 or 900 or 1200 mm | 700 or 900 or 1200 mm | 700 or 900 or 1200 mm |
Technical specifications of electric motor of TR-EL barrel discharge pump model TR-EL
Debem barrel pump with 800 watt electric motor and open impeller allows pumping of corrosive fluids up to 900 cc viscosity. The motor is equipped with a safety switch to prevent accidental restart after a power failure or power failure.
Technical specifications of Debem barrel pump electric motor | |
the power | ۸۰۰ Watts |
Voltage | 230 volts single phase |
Engine speed | ۱۰۵۰۰ |
Degree of protection | IP ۵۴ |
Memory class | F |
Dubai | 90 liters per minute |
viscosity | 900 cm Poiz |
density | 1.6 grams per cubic centimeter |
Weight | 3.8 kg |
Explosion-proof motor | Custom-made |
Technical Specifications of Pneumatic (Pneumatic) Engine Barrel Model TR-PN
Debem barrel pump with pneumatic motor and open impeller allows pumping corrosive liquids up to 600 viscosity. This motor allows you to adjust the flow rate.
Technical specifications of Pneumatic (pneumatic) motor Debem barrel pump | |
the power | 300 watts (0.42 hp) |
Dubai | 70 liters per minute |
viscosity | 600 cm |
density | 1.2 grams per cubic centimeter |
Weight | 1.1 kg |
Explosion-proof motor | Custom-made |
Dimensions and size of Debem barrel discharge pump
Debem Barrel Pump Components
A: Engine coupling
B: Engine nuts and washers
C: Bearings
D: Pump outlet
E: Pump body
F: Teflon liner (PTFE)
G: Butterfly
H: Suction
I: saw
Agma Company , as the official sales and after-sales service representative of Italian Debem products in Iran, is ready to provide services to our valued customers.
For information on inventory and up-to-date prices, contact our experts Agma Company .
barrel pump
Debem barrel discharge pumps or Debem barrel pumps are designed to transfer fluids from inside the tanks.
Debem Barrel Dump Pump Catalog
Debem barrel drain pump price list
Technical Specifications
Technical specifications of Debem barrel discharge pump
Debem barrel pump is easy to transport and easily placed inside the tanks and transfers the desired fluid. Debem barrel pumps with 500 watt electric motor are able to transfer fluids with viscosity of 600 cpm and pneumatic motor with fluids with viscosity of 900 cpm.
Debem TR Barrel Pump
- Material: polypropylene (PP), kainar (PVDF), stainless steel (316 SS316)
- Stimulus: Pneumatic and electric
- Viscosity: Maximum transfer viscosity 900 cm
- Immersion pipe length: 900 mm to 1200 mm
- Flow: Maximum 90 liters per minute
- Head: Maximum 15 meters
Debem barrel pumps consist of an immersion tube, at the end of the tube is an open impeller which is connected to the electric motor by a shaft which causes the fluid to be sucked into the pump tube and the fluid is pushed to the outlet. he does.
- A: Coupling
- B: Engine nuts and washers
- C: Bearings
- D: دهش
- E: Lola, Gouta, War
- F: Teflon bushing
- G: Butterfly
- H: Suction
- I: saw
Note : Dabm barrel discharge pumps should not work dry, as the presence of air in the fluid will also damage the pump.
How to name the Debam TR barrel pump series
Engine | Immersion pipe length | Pump material | Pump model |
Electric (EL), Pneumatic (PN) | 1200 mm, 900 mm | PP، PVDF، SS316 | TR |
For example TR P 1200 EL
1. TR-EL barrel pump pump
- Material: PP, PVDF, SS316
- Motor: 800/500 watts
- Flow: 80/90 liters per minute
Pump model | TRP – EL | TRF-EL | TRA – THE |
Input (mm) | 42 | 40 | 42.5 |
Output (mm) | 25 | 25 | 25 |
Maximum temperature (Celsius) | 60 | 95 | 95 |
Motor power (watts) | 500/800 | ||
Motor voltage | 230W 50/60Hz | ||
Engine protection standard | IP 54 | ||
Engine class | F | ||
Dubai | 500 watts 80 liters per minute, 800 watts 90 liters per minute | ||
Weight (kg) | 5.1 – 5.4 | 5.4 – 5.6 | 8 – 9 |
Inlet material (suction) | Polypropylene | کاینار | Steel 316 |
hot sex | Hostel | ||
Bush sex | Teflon | ||
Rotor material | ECTFE | ||
Material of internal parts | Teflon + polypropylene | Cainar + Teflon | Teflon + polypropylene |
viscosity | 500 watts 600 cp, 800 watts 900 cp |
TR-EL barrel discharge pump performance curve
Dimensions of TR-EL barrel pump
2. TR-PN barrel pump
- Material: PP, PVDF, SS316
- Engine: 0.33 hp
- Pressure: 7 times
- Flow rate: 80 liters per minute
Pump model | TRP – PN | TRF – PN | BETWEEN – PN |
Input (mm) | 42 | 40 | 42.5 |
Output (ml) | 25 | 25 | 25 |
Maximum temperature (Celsius) | 60 | 95 | 95 |
Motor power (watts) | 0.33 hp a 7 times | ||
Dubai | 80 liters per minute | ||
Weight (kg) | 2.5 – 2.8 | 2.8 – 3 | 5.4 – 5.5 |
Inlet material (suction) | Polypropylene | کاینار | Steel 316 |
hot sex | Hostel | Hostel | Steel 316 |
Bush sex | Teflon | ||
Rotor material | ECTFE | ||
Material of internal parts | Teflon + polypropylene | Cainar + Teflon | Teflon + polypropylene |
viscosity | 600 cm |
TR-PN barrel discharge pump performance curve
Dimensions of TR-PN barrel pump
Use Debem barrel pump or Debem barrel drain pump
Debum barrel pumps, with their variety of materials, are able to transfer fluids from food, pharmaceutical and corrosive fluids. Debem barrel pumps are produced in different dimensions that meet the needs of a wide range of users.
Advantages of Debt Barrel Pump
- Portable and easy to transport and maintain
- Ability to work with electric motors and pneumatics
- Ability to transfer flammable fluids
- Variety in materials and dimensions
History of Debem Company
Debum Italy has more than 30 years of experience in the production of diaphragm pumps, polymer and barrel discharge pumps. This company exports its products to many countries of the world and offers after-sales services, and in Iran, the products of Debam Italy and Debam Barrel Pump are among the most popular brands.
Debem barrel pump price list
All prices can be changed without prior notice, please contact the sales department to inquire about the purchase price.
Updated date: 1400/05/30
Row | to explain | Price in Tomans |
1 | The price of DBAM TRA EL 1000 barrel pump pump is 316 stainless steel body | 43,000,000 |
2 | Price of DBAM TRA EL 1200 stainless steel barrel pump 316 | 43,500,000 |
3 | Price of DBAM TRA EL 1500 barrel pump: 316 stainless steel body | 44,100,000 |
4 | Price of DPB TRP EL 1000 barrel pump Polypropylene | 35,100,000 |
5 | Price of Debam TRP EL 1200 polypropylene barrel pump | 36,200,000 |
6 | Price of DPB TRP EL 1500 polypropylene | 37,000,000 |
7 | Price of DBM TRF EL 1000 barrel pump PVDF body | 46,000,000 |
8 | Price of DBM TRF EL 1200 barrel pump PVDF | 47,000,000 |
9 | Price of DBM TRF EL 1500 barrel pump PVDF body | 48,700,000 |
10 | Price of DRABN TRA PN 1000 barrel pump pump 316 stainless steel body | 44,000,000 |
11 | Price of TB PRA 12N barrel drain pump Pneumatic actuator 316 stainless steel body | 45,000,000 |
12 | Price of TB PRA 1500 barrel drain pump Pneumatic actuator 316 stainless steel body | 45,200,000 |
13 | Price of DPB TRP PN 1000 barrel discharge pump Polypropylene body air drive | 37,100,000 |
14 | Price of DPB TRP PN 1200 barrel drain pump for polypropylene body | 38,200,000 |
15 | Price of DPB TRP PN 1500 barrel discharge pump Polypropylene body air drive | 39,000,000 |
16 | DFB TRF PN 1000 barrel discharge pump PVDF body | 48,000,000 |
17 | Pump barrel discharge pump TRF PN 1200 PVDF body air drive | 49,000,000 |
18 | DFB TRF PN 1500 barrel discharge pump PVDF body | 50,700,000 |