DOSEURO Company
Doseuro is an Italian manufacturer with more than 20 years of experience in dosing pumps (chemical pumps) and their equipment.
Doseuro Company was founded in 1984 under the name Dosatron Srl, which was later changed to Doseuro Srl in 2000. The company opened an office in the UK in early 2007 to better capture the attention of its UK customer base and to see this operation as integral to the development of the Doseuro brand.
Doseuro Doseuro is a specialist manufacturer of solenoid valves, hydraulic diaphragms, plunger pistons, mechanical diaphragms and metering pumps) as well as various electronic mixers (agitators) and polyelectrolyte blending systems.
The company also has a team of knowledgeable and knowledgeable staff and expert consultants and after-sales support so that its customers always have reliable information resources and technical support about the products.
Doziuro products are used in many industries, including paper production, water and wastewater treatment, chemicals and dyes, biofuels, and agriculture.
Doziuro Italy is one of the leading manufacturers of dosing pumps and chemical injection packages worldwide. Over the years, the company has been working on the design of injection systems, combining technical knowledge and understanding of customer needs. Continuous research and continuous effort are the main reasons for the success of the Italian company Doseuro. The use of dosing pumps by more than thousands of industrial units is a testament to their high quality. To ensure continuous and long-term operation, all products of this company have been carefully designed, produced and tested. Doziuro Italy has a representative office all over the world, including Iran, and its products are offered through them. Doseuro products include three general categories of dosing plunger pumps, hydraulic diaphragm and mechanical diaphragm. These pumps are widely used for injecting materials in food, printing, paper, paint, water and wastewater treatment, agriculture, pharmaceuticals, rubber and plastics, steel, steel, marine, oil and gas and petrochemical industries. Take.
- Brand Name DOSEURO :
- Country of manufacture: Italy
- Products: Dosing planer pumps, hydraulic diaphragm and mechanical diaphragm
Doziuro injection pump price
The Italian company Doseuro, with its continuous research and efforts in the design and production of various dosing pumps, has been able to gain a special place among its customers today. In the table below, we have included the price list of the most widely used Dozio injection pumps, along with their technical specifications and operating range, which was updated on 1400.12.01 . Please contact our partners in the sales department for the latest prices.
|
Series
|
Dubai range
(L/h) |
Working pressure range
(bar) |
Price range
(Rials) |
|---|---|---|---|
|
DOSEURO PDP-AI dosing plunger pump
|
44 to 3569
|
40 to 250
|
Call
|
|
DOSEURO PDP-SDI plunger dosing pump
|
231 to 4028
|
14 to 80
|
Call
|
|
DOSEURO Dosing Plunger Pump Model SR-A
|
15.6 to 1458
|
4 to 230
|
Call
|
|
DOSEURO plunger pump dosing model SR-D
|
49 to 1400
|
3 to 14
|
Call
|
|
DOSEURO hydraulic diaphragm dosing pump model SR-B & BR
|
60 to 1068
|
11 to 60
|
Call
|
|
DOSEURO hydraulic diaphragm dosing pump model SR-SD
|
60 to 1068
|
7.2 to 40
|
Call
|
|
DOSEURO mechanical diaphragm dosing pump model SR-FM
|
14 to 47
|
5 to 10
|
Call
|
Advantages
What do you think makes Doseuro pumps unique?
The most important factor in the popularity of this brand is the ratio of price to competitive quality, which is always in line with customer expectations. Each Doziuro product is designed for a specific application and has something to say. High reliability with continuous product development, up-to-date production techniques, constant quality control and rigorous testing at all stages of production are among the company’s actions to better present its products. Each injection pump model is carefully designed, manufactured and tested to have a long and useful life.
General specifications
All Italian Dozio pumps are installed with high quality and standard with 4-pole electric motors that comply with UNELMEC specifications. Their motor power range is 0.09 to 4 kW at European standard 3-phase voltages (230 / 400V). Non-standard motors with many alternative specifications are also available, including different voltages and frequencies, insulation standards, and special explosion-proof versions. The injection rate of doseuro pumps in accordance with API675 standard by the eccentric cam is fully adjustable manually. Automatic adjustment using servo motors, pneumatic control or motor frequency control, PROFIBUS or other BUS interface can be ordered if needed. The reducing system, which is made of a screw connected to a wheel, makes the gearbox very strong. Dozio pumps are complemented by a wide range of accessories, including valves, filters, pressure relief and load valves, injection fittings and shock absorbers. Also, special versions of these pumps can be made to suit specific applications according to customer orders.
View of the production range
Doseuro chemical injection pumps are available in three main versions of piston pumps with packaged plungers, hydraulic diaphragm and mechanical diaphragm. High pressure pumps can also be ordered upon request. Doziero’s product range also includes a variety of electric or electromagnetic solenoid motors. The company also produces complete injection packages, electric mixers and fully automatic polyelectrolyte preparation and injection machines in powder and emulsion form. The most common applications of Doseuro chemical injection pumps are listed below.
- Food industry
- Paper mills
- Paint production industries
- Water and wastewater treatment
- Drug factories
- Agricultural and horticultural applications
- Production of rubber and plastics
- Oil, gas and petrochemical industries
- Iron and steel industries
DOSEURO pump dealer
Dozio Italy has sales and after-sales service agencies in many countries around the world, including Iran. Flow Pars Industrial Group is ready to provide services including advice, price, repair, catalog and technical specifications to you, dear customers, by using specialists and experts with experience in the field of injection systems as a representative of Doseuro pump in Tehran.
Doseuro Dosing Pump
Dosiro Italy offers dosing pumps in the following three models:
- Dosage solenoid dosing pump
- Dozero motor diaphragm injection pump
- Doseuro engine piston pump metering
Dosage pump dosing catalog
Doziro injection pump price list
Doseuro Company
Doziuro company has been operating in the field of injection pump production since 1987 and today is known as a company whose products, in addition to competitive prices, have the highest quality of European industrial products. The company’s product range includes a variety of piston and motor diaphragm and piston pumps. And sensitivity to customer needs is one of the main reasons for Doziuro’s success.
The company has gained its high reputation by continuous product development, updating production techniques and eternal quality.
Each pump dose model is carefully designed and tested to have a long service life.
Dosior pump dosing pump SR A series:
Dosing pump (injection pump) is used to transfer a certain volume of fluid per unit of time with high accuracy, hence they are also called pump metering. In dosing pumps, there are two parameters, flow and pressure. The operating pressure is constant, but the output flow is controlled manually or automatically. Dosing of dosing pumps is controlled by the length of the reciprocating course of the diaphragm or piston, and in some other dosing pumps is controlled by the number of pulses of the diaphragm. Vertically equipped with UNEL-MEC specifications, this type of motor has useful specifications such as different voltages, insulation classes and special explosion-proof versions. The motor power range is from 0.18 kW to 0.75 kW and has a 3-phase voltage of 230 / 400 volts is 50/60 Hz, 4 poles and also 1 phase voltage is 230 / 50-60 Hz or 110/60 Hz.
Hydraulic specifications of Dosioro SR A dosing pump:
Maximum discharge 1458 liters per hour
Maximum pressure 250 bar
Liquid temperature 90 ° C with stainless steel pump head
Liquid temperature 40 ° C with PVC pump head
Application of Dosioro SR A dosing pump:
It has the ability to transfer many corrosive and chemical fluids, including acids and bases, as well as injections of dyes, chlorine and anti-foaming agents.
For free consultation – selection and purchase of products, contact our sales technical experts.
Note: Watersolutions Store is committed to providing the original and reputable products of DOSEURO Company.
Hydraulic Dosage Table of Dosior SR A Pump:
Dosage pump DOSEURO DOSEURO series SR type SD |
Features :
| Hydraulic diaphragm pumps are suitable for use in the following cases:
Dosage fluid containing small amounts of suspended solids, abrasive or toxic solution and when piston deficiency is not accepted is included. Features of this special sandwich pump diaphragm and reliable rupture prevention Pump with standard gearbox reduction system and with an existing electric motor IEC B14 that complies with UNEL – MEC specifications. Engine power range from 0.18 kW to a maximum of 0.75 kW Many options are available, including different voltages, insulation classes and special explosion-proof versions. Gearbox is a standard wheel worm Reduction system with all bearings supported in a fully lubricated oil Gearbox Stroke adjustment mechanism Long positive spring return is a stroke operated by an abnormal person. |
Pump head
Pump heads are produced as standard. Material: SS316 and PVC. A wide range of other materials such as HASTELLOY, alloy, PTFE, PVDF and PP are also available. Maximum temperature of pumped fluids:
60 ° C with SS 316 pump head
40 ° C with PVC pump head
The pump heads have a cover for cooling
And heating is available
Diaphragm
PTFE
Diaphragm failure detection
Barometer
Press the keys
Resistant pressure switches
Suction and discharge
Telecom
Standard: threaded, on request: flange, UNI, ANSI or NPT.
All pumps use check ball valves as
Standard: One or two balls in each valve, determined by piston diameter or building materials
Stroke adjustment
Adjust the flow rate while it is possible that the stamp is running or stopped. This movement of the steering diaphragm of the precision reciprocating gearbox that provides the exact volume displacement. Stroke adjustment can be done by:
– Manual: with linear micrometer impact
handle
– Electric: via servo motor with
4-20 mA input signal or interface
With another PROFIBUS or BUS.
– Pneumatic: by serum pneumatic
Controller with 3 to 15 PSI signal
Air inlet
Multi-head pumps
Multi-head pumps are available. Upon request, the flow rate of each pump head can be independently stopped or run while running.
series pump SD ”
Hydraulic diaphragm pumps are available in different cases
Model:
SD 125N: Stroke length 12.5 mm
SD 175N: Stroke length 17.5 mm
SD 250N: Stroke length 25 mm
The above models have differences in aperture size for different capacities and pressures
Some standard measures for hydraulic diaphragm pumps:
| in process | Pump head | Piston | Valve (ball) | Valve seat | Diaphragm | Piston baskets | Oil room |
| 03 | PVC | S.S. 420 TEMP. | PYREX | PVC | PTFE SANDWICH | AU / NBR | ALLUMIUM |
| 05 | S.S. 316 | S.S. 420 TEMP | S.S. 316 | S.S. 316 | PTFE SANDWICH | AU / NBR | ALLUMIUM |
| 06 | S.S.316 | S.S. 420 TEMP. | S.S. 316 | S.S. 316 | PTFE SANDWICH | AU / NBR | Fe.00 |
| 07 | PP | S.S. 420 TEMP. | PYREX | PP | PTFE SANDWICH | AU / NBR | ALLUMIUM |
PP = polypropylene
SS 316 = stainless steel 316
SS 420 TEMP. Hard stainless steel 420
General dimensions
If you want to buy a dosing pump and get acquainted with its various brands, you can get free advice on choosing the right product by calling the experienced experts of the water solution store .
Technical Specifications
Technical specifications of dosing pump
Dosing pumps are used for precise fluid injection and are marketed with a variety of mechanisms and materials to be able to transfer a wide range of fluids. The Italian pumping company Doseuro has also introduced its dosing pumps in three models: solenoid, motor diaphragm and motor piston with various materials, which is suitable for many users.
Doseuro solenoid pump metering
This series of Doseuro dosing pumps is widely used for low capacities. The operation of these pumps is diaphragm with solenoid actuator. Due to the high efficiency and low energy consumption in this series, dosing pumps are used in very low capacities. Dosing Dosiro Italy solenoid dosing pumps are marketed in pp, pvdf, pvc and stainless steel materials. These pumps are used to transfer chlorine frequently. The power supply of this series is a 230 volt, 60/50 Hz electric actuator with IP 68 protection standard.
Doseuro motor diaphragm pump monitoring
The Dozio pump motor dosing diaphragm series has a three-phase or single-phase electric actuator, which is suitable for high capacities, toxic and corrosive substances and even liquids containing solid particles. The maximum transmission capacity of this series is 1400 liters per hour and the maximum output pressure is 40 times. PP, PVDF, PVC and stainless steel are the materials of this series, which has the ability to transfer various fluids due to the Teflon diaphragm.
Doseuro motor piston dosing pump
The function of this series is piston. The reciprocating motion of the piston inside the cylinder causes the fluid to move. The actuator of this series is also three-phase or single-phase electric. The body material of this series is PP, PVDF, PVC and stainless steel, which has the ability to transfer corrosive and chemical fluids.
Dozero hydraulic injection pump
Dosage hydraulic pump dosing is in accordance with API 675 standard. This series of dosing pumps of the Italian company is marketed in various materials and capacities and with explosion-proof electric actuators, which are very suitable for transferring sensitive and flammable fluids. This series of dosing pumps are frequently used in petrochemical and oil and gas industries.
High pressure dosing pump with high flow rate
The high pressure dosing series of the dosing pump has the ability to create a pressure of up to 250 bar and the high discharge series of the dosing pump can produce up to 4 cubic meters per hour. This series is supplied to Barar in polymer and metal materials and can be used in many industries due to the variety of production.
Benefits of dosing pump dosing
- Access to high pressure and flow rates
- Variety of materials and capacity
- Transfer of special and sensitive fluids with explosion-proof and hydraulic series
- Possibility of continuous operation
- Single-phase and three-phase actuators
- Complies with API 675 standard
Application of Doseuro pump dosing
Transfer of corrosive and toxic fluids used in food, pharmaceutical and health industries such as bleach injection, chlorine injection, petrochemical, oil and gas, transfer of solvents
Doseuro pump dosing price list
Sorry, all prices are being updated, please contact the sales department to inquire about the purchase price.
| Row | to explain | Price in Tomans |
| 1 | Dosage solenoid pump dosing price | Call |
| 2 | Dosage motor diaphragm pump dosing price | Call |
| 3 | Dosage motor piston dosing pump price | Call |
| 4 | Price of Doziuro hydraulic injection pump Italy | Call |
| 5 | Doseuro pump series meter price Dubai high Italy | Call |
| 6 | Doseuro series high pressure pump metering price | Call |
Let us know what you think