Specifications diaphragm pump Lutz
Diaphragm pump-Davis that originated from the forecast it. can material critical with your fully-functional, safe, and sure-pumping track. Also, these pumps for corrosive substances, etc., abrasive, etc. flammable and also for the fluid with viscose very top are used. A wide variety of applications, coverage working fluid with a viscosity different, etc., suitable for the conditions and activities of the heavy and finally, consumer confidence high, and the ability to rely on other benefits of the pump diaphragm Lutz can be.
Diaphragm pump Lutz 1/4 inch | Diaphragm pump Lutz 3/8 inch |
Diaphragm pump Lutz 1/2-inch | Diaphragm pump Lutz 1 inch |
Diaphragm pump Lutz 1 and 1/2 inch | Diaphragm pump Lutz 2 inch |
Diaphragm pump Lutz 3 inch | |
All information contained in the following tables related to the diaphragm pump Lutz non-metal can be, to access to information, characteristics of the pump diaphragm metal Luther to the catalog, please visit.
Specifications diaphragm pump Lutz 1/4 inch
DMP 1/4″ PP | DMP 1/4″ PVDF | DMP 1/4″ PA | |
Body material | Polly propylene | Monetary وینیلیدن fluoride | Polyamide |
Aperture | TPV (NBR-PP), TPV (EPDM-PP), PTFE | PTFE | TPV (EPDM-PP), PTFE |
Milk | PTFE | PTFE | PTFE |
Flood | NBR, EPDM, PTFE | PTFE | EPDM, PTFE |
Flow rate | A maximum of 16 liters per minute | A maximum of 16 liters per minute | A maximum of 16 liters per minute |
Suction lift: dry | 6 km | 6 km | 6 km |
Suction lift: PTFE-version | 5 km | 5 km | 5 km |
Working pressure | Max 6,8 bar | Max 6,8 bar | Max 6,8 bar |
Temperature | A maximum of 66 degrees centigrade | A maximum of 93 degrees centigrade | A maximum of 66 degrees centigrade |
Solids handling: | Max Ø 1,6 mm | Max Ø 1,6 mm | Max Ø 1,6 mm |
Suction | 1/4″ BSP female | 1/4″ BSP female | 1/4″ BSP female |
Deliverability | 1/4″ BSP female | 1/4″ BSP female | 1/4″ BSP female |
Specifications diaphragm pump Lutz 3/8 inch
DMP 3/8″ PP | DMP 3/8″ PVDF | DMP 3/8″ PA | |
Body material | Polly propylene | Monetary وینیلیدن fluoride | Polyamide |
Aperture | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | TPV (EPDM-PP),PTFE,FPM | TPV (NBR-PP),PTFE,FPM |
Milk | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | PTFE | TPV (NBR-PP),PTFE |
Flood | NBR,EPDM,PTFE | PTFE | PTFE |
Valve seat: PTFE-version |
PP | PVDF | Stainless steel |
Flow rate: | A maximum of 34 l/min | A maximum of 34 l/min | A maximum of 34 l/min |
Suction lift: dry PTFE-version |
5,2 m 3 m |
5,2 m 3 m |
5,2 m 3 m |
Working pressure | MAX 8 bar | MAX 8 bar | MAX 8 bar |
Temperature | A maximum of 66 °C | A maximum of 93 °C | A maximum of 66 °C |
Solids handling: with Max-PassTM PTFE-version |
Max Ø 6,4 mm max Ø 1,6 mm |
Max Ø 6,4 mm max Ø 1,6 mm |
Max Ø 6,4 mm max Ø 1,6 mm |
Suction | 3/8″ BSP female | 3/8″ BSP female | 3/8″ BSP female |
Deliverability | 3/8″ BSP female | 3/8″ BSP female | 3/8″ BSP female |
Specifications diaphragm pump Lutz 1/2-inch
DMP 1/2″ PP | DMP 1/2″ PVDF | DMP 1/2″ PA | |
Body material | Polly propylene | Monetary وینیلیدن fluoride | Polyamide |
Aperture | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | PTFE | PTFE |
Valve ball: | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | PTFE | PTFE |
Flood | NBR,EPDM,PTFE,FPM | PTFE | PTFE |
Valve seat: | PP | PVDF | PVDF, SS* |
Flow rate: | A maximum of 65 l/min | A maximum of 65 l/min | A maximum of 65 l/min |
Suction lift: with Max-PassTM dry PTFE-version |
6 m 4,5 m 3 m |
6 m 4,5 m 3 m |
6 m 4,5 m 3 m |
Working pressure | MAX 8 bar | MAX 8 bar | MAX 8 bar |
Temperature | A maximum of 66 °C | A maximum of 93 °C | A maximum of 66 °C |
Solids handling: with Max-PassTM |
Max Ø 3,2 mm max Ø 9,5 mm |
Max Ø 3,2 mm max Ø 9,5 mm |
Max Ø 3,2 mm max Ø 9,5 mm |
Suction | 1/2″ BSP female | 1/2″ BSP female | 1/2″ BSP female |
Deliverability | 1/2″ BSP female | 1/2″ BSP female | 1/2″ BSP female |
Specifications diaphragm pump Lutz 1 inch
DMP 1″ PP | DMP 1″ PVDF | |
Body material | Polly propylene | Monetary وینیلیدن fluoride |
Aperture | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | TPV (EPDM-PP),PTFE,FPM |
Valve ball: | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | PTFE,FPM |
Flood | NBR,EPDM,PTFE,FPM | PTFE, FPM |
Valve seat: | PP | PVDF |
Flow rate: | A maximum of 156 l/min | A maximum of 156 l/min |
Suction lift: with Max-PassTM dry PTFE-version |
5,5 m 4,5 m 3 m |
5,5 m 4,5 m 3 m |
Working pressure | MAX 8 bar | MAX 8 bar |
Temperature | A maximum of 66 °C | A maximum of 93 °C |
Solids handling: with Max-PassTM |
Max Ø 6,4 mm max Ø 19 mm |
Max Ø 6,4 mm max Ø 19 mm |
Suction | Flange DIN, DN 25, PN 10 , ANSI B16,5 1″ 150 PSI |
Flange DIN, DN 25, PN 10 , ANSI B16,5 1″ 150 PSI |
Deliverability | Flange DIN, DN 25, PN 10 , ANSI B16,5 1″ 150 PSI |
Flange DIN, DN 25, PN 10 , ANSI B16,5 1″ 150 PSI |
Specifications diaphragm pump Lutz 1 and 1/2 inch
DMP 1 1/2″ PP | DMP 1 1/2″ PVDF | |
Body material | Polly propylene | Monetary وینیلیدن fluoride |
Aperture | TPV (NBR-PP),TPV (EPDM-PP),PTFE | TPV (EPDM-PP),PTFE |
Valve ball: | TPV (NBR-PP),TPV (EPDM-PP),PTFE | TPV (EPDM-PP),PTFE |
Flood | NBR,EPDM,PTFE | PTFE |
Valve seat: | PP | PVDF |
Flow rate: | Maximum 492 l/min | Maximum 492 l/min |
Suction lift: dry PTFE-version |
4,5 m 3 m |
4,5 m 3 m |
Working pressure | Max 8,2 bar | Max 8,2 bar |
Temperature | A maximum of 66 °C | A maximum of 93 °C |
Solids handling: | Max Ø 6,4 mm | Max Ø 6,4 mm |
Suction | Flange DIN DN 40 PN 10 , ANSI B16,5 1 1/2″ 150 PSI |
Flange DIN DN 40 PN 10 , ANSI B16,5 1 1/2″ 150 PSI |
Deliverability | Flange DIN DN 40 PN 10 , ANSI B16,5 1 1/2″ 150 PSI |
Flange DIN DN 40 PN 10 , ANSI B16,5 1 1/2″ 150 PSI |
Specifications diaphragm pump Lutz 2 inch
DMP 2″ PP | DMP 2″ PVDF | |
Body material | Polly propylene | Monetary وینیلیدن fluoride |
Aperture | TPV (NBR-PP),TPV (EPDM-PP),PTFE | PTFE |
Valve ball: | TPV (NBR-PP),TPV (EPDM-PP),PTFE | PTFE |
Flood | NBR,EPDM,PTFE | PTFE |
Valve seat: | PP | PVDF |
Flow rate: | Maximum 681 l/min | Maximum 681 l/min |
Suction lift: dry PTFE-version |
4,5 m 3 m |
4,5 m 3 m |
Working pressure | Max 8,2 bar | Max 8,2 bar |
Temperature | A maximum of 66 °C | A maximum of 93 °C |
Solids handling: | Max Ø 6,4 mm | Max Ø 6,4 mm |
Suction | Flange DIN, DN 50, PN 10 , ANSI B16,5 2″ 150 PSI |
Flange DIN, DN 50, PN 10 , ANSI B16,5 2″ 150 PSI |
Deliverability | Flange DIN, DN 50, PN 10 , ANSI B16,5 2″ 150 PSI |
Flange DIN, DN 50, PN 10 , ANSI B16,5 2″ 150 PSI |
Specifications diaphragm pump Lutz 3 inch
The DMP 3″ Aluminium | The DMP 3″ Stainless steel | |
Body material | Aluminum | Stainless steel |
Aperture | PUR TPV (EPDM-PP),PTFE,FPM | PUR TPV (EPDM-PP),PTFE,FPM |
Valve ball: | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM | TPV (NBR-PP),TPV (EPDM-PP),PTFE,FPM |
Flood | NBR,EPDM,PTFE,FPM | NBR,EPDM,PTFE,FPM |
Valve seat: | PA, EPDM, FPM, NBR | PA, EPDM, FPM, NBR |
Flow rate: | Maximum 954 l/min | Maximum 954 l/min |
Suction lift: dry PTFE-version |
6.1 m 5.2 m |
6.1 m 5.2 m |
Working pressure | Maximum 8.2 bar | Maximum 8.2 bar |
Temperature | A maximum of 93 °C | A maximum of 93 °C |
Solids handling: | Max Ø 11 mm | Max Ø 11 mm |
Suction | 3″ BSP female | 3″ BSP female |
Deliverability | 3″ BSP female | 3″ BSP female |