Injecta Dosing Pump

Selling dosing pump Injecta Injecta Italy

The Italian company Injecta has more than 30 years of experience in the field of manufacturing and manufacturing various types of diaphragm , peristaltic and dosing pumps , solenoid and electromotor pumps, and washing and water treatment systems. Dosing pumps of Injecta Italy are from the family of positive displacement pumps that are used for injection and dosing of a certain amount of fluid in food, pharmaceutical, chemical, medical, water and wastewater treatment industries.

Technical specifications of injectable pump dosing

Italian Injecta injection pump is produced in diaphragm and piston models that have the ability to inject a certain amount of fluid. Injecta dosing pump with injectable flow adjustment is analog and digital and is made of various materials such as kainar (PVDF), polypropylene (PP), PVC and steel.

Athena Series Injecta Dosing Pump

Athena series injector dosing pump is produced in Athena BX, Athena BL, Athena AM, Athena Air Cond, Athena MT, Athena BT, Athena PR, Athena MP and Athena BX 12 VDC models, which we will review in the following models: .

 

Technical specifications of Athena series injector pump dosing (Athena)

• Flow: 0.4 to 110 liters per hour
• Pressure: 0.1 to 20 bar
• Stimulus type: Magnetic solenoid
• Ability to adjust the flow from 0 to 100% in all models
• Ability to connect the level sensor (Athena BL model)
• With 4 to 20 mA analog signal to control and adjust the maximum flow rate (Athena AM and Athena MT models)
• Set weekly and daily schedule (Athena BT model)
• Ability to install PH and RX control sensors and 4 to 20 mA output (Athena PR)
• Ability to install sensors for measuring chlorine, hydrogen peroxide and acid and install PT100 heat sensor as well as 4 to 20 mA output (Athena PR)
• Head material: Kaintar (PVDF)
• Aperture material: Teflon (PTFE)
• Ball material: Ceramic
• Power supply: 100 to 240 volts
• Frequency: 50 and 60 Hz
• Degree of protection: IP65

Technical information of Athena series Injecta injection pump

Model ATHENA ATBX 1

 

Model ATHENA ATBX 2

 

Model ATHENA ATBX 3

 

Model ATHENA ATBX 4

 

Model ATHENA AIR COND

 

Model ATHENA LOW FLOW RATE

 

Model ATHENA 12 VDC

GEA series injector dosing pump

GEA series Injecta dosing pump is produced in GEA BL, GEA AM, GEA MT, GEA PR, GEA R AM and GEA R MT models, which we will review in the following models.

 

Technical specifications of GEA series Injecta dosing pump

• Flow: 0.4 to 110 liters per hour
• Pressure: 0.1 to 20 bar
• Stimulus type: Magnetic solenoid
• Ability to adjust the flow from 0 to 100% in all models
• Ability to connect the level sensor (GEA AM model)
• It has 4 to 20 mA analog signal to control and adjust the maximum flow rate (GEA AM, GEA MT, GEA R AM and GEA R MT models)
• Ability to install PH and RX control sensors and 4 to 20 mA output (GEA PR)
• Head material: Kaintar (PVDF)
• Aperture material: Teflon (PTFE)
• Ball material: Ceramic
• Power supply: 100 to 240 volts
• Frequency: 50 and 60 Hz

Technical information of Injecta injection pump GEA series

GEA model 1

 

GEA model 2

 

GEA model 3

 

GEA model 4

 

Model GEA LOW FLOW

 

Model GEA R

 

Dosing pump Injecta Hydra series (Hydra)

Hydra series injector dosing pump is produced in Hydra BX, Hydra BL, Hydra MA, Hydra BC, Hydra MT and Hydra PR models, which we will review in the following models.

 

Technical specifications of Hydra series injector pump dosing

• Flow: 3 to 5 liters per hour
• Pressure: 8 to 10 times
• Stimulus type: Magnetic solenoid
• Ability to adjust the flow from 0 to 100% in all models
• Ability to connect level sensor (Hydra BL model)
• It has 4 to 20 mA analog signal to control and adjust the maximum flow rate (Hydra MA and Hydra MT models)
• Set weekly injection schedule (Hydra MT model)
• Ability to install PH and RX control sensors and PT100 heat sensor (Hydra PR)
• Head material: Kaintar (PVDF)
• Aperture material: Teflon (PTFE)
• Ball material: Ceramic
• 230V 50Hz (Hydra BX model)
• 100 to 240V / 50 and 60Hz (other models)
• Degree of protection: IP65

Technical information of Injecta injection pump Hydra series

HYDRA model

Olimpia series injector dosing pump (Olympia)

The Olympia Series Injecta dosing pump is produced in Olimpia BP, Olimpia Low Flow and Olimpia Low Noise models, which we will review in the following.

 

Technical specifications of dosing pump Injecta Olympia series (Olimpia)

• Flow rate: 0.5 to 5 liters per hour
• Pressure: 5 to 7 times
• Stimulus type: Magnetic solenoid
• Ability to adjust the flow from 0 to 100% in all models
• Fire-resistant and acid-resistant body made of polypropylene (PP)
• Head material: Kaintar (PVDF)
• Aperture material: Teflon (PTFE)
• Ball material: Ceramic
• Power supply: 100 to 240 volts
• Frequency: 50 and 60 Hz
• Degree of protection: IP65

Technical information of Injecta injection pump of Olimpia series

Model OLIMPIA BP

Model OLIMPIA LOW FLOW

Model OLIMPIA LOW NOISE

Dosing of Taurus series injector electromotor piston pumps, model TP

This model of Injecta injection pumps has an electromotive actuator and is of piston type, the force of which is transferred from the electromotor to the gearbox and causes the piston or plunger to move. The dosing of Injecta piston pump is produced in TP model. We pay for the product.

Technical specifications of Injecta TP piston pump dosing pump

• Flow rate: 1.5 to 1000 liters per hour
• Pressure: up to 20 bar
• Head material: PVC and steel 316 (SS 316)
• Piston material: Ceramic and steel 316 (SS 316)
• Engine protection degree: IP55

 

Technical information of Injecta piston injection pump (Injecta) model TP

 

Dimensions and size of TP injector pump metering model

 

 

Dosing of Taurus Injecta Diameter Electromotor Pumps Model TM

This model of injectable injection pumps has an electromotive actuator and a diaphragm type that the force is transferred from the electric motor to the gearbox and causes the diaphragm plate to move. The dosing of the Injecta diaphragm pump is produced in the TM model. We will pay.

 

Technical specifications of injectable diaphragm pump model TM

• Flow rate: 5.5 to 460 liters per hour
• Pressure: up to 10 bar
• Head material: polypropylene (PP), kainar (PVDF), PVC and steel 316 (SS 316)
• Aperture material: Teflon (PTFE)
• Engine protection degree: IP55

Technical information of Injecta diaphragm injection pump Model TM

Dimensions and size of Injecta TM model diaphragm pump metering

Advantages of Injecta Italy injection pump

• High build quality
• High variety in pump materials for use in a variety of fluids
• Simple maintenance
• Easy installation
• Various flow and pressure
• High diversity in model and structure

Dosing applications of Injecta pumps

• Food and pharmaceutical industries
• Chemical, power plant and petrochemical industries
• Medical industry
• Water and wastewater treatment plants
• Public and private pools
• Cosmetics industry
• Industrial washing systems

Price list of Injecta pump in Italy

Sorry, all prices have changed, contact sales experts to inquire about the purchase price.

For information on the price and availability of various types of dosing pump models of Injecta (Injecta) in Italy, as well as to receive technical advice and proper selection of this product, contact the experts of Aria Geshtavar Mana Company (Agma) .

 

 

 

 

 

Dosing pump injecta model ATHENA 5-8

dosing pump model ATHENA 5-8 made by the Italian company INJECTA , which is a manufacturer of dosing pumps or injection pumps in different types and models. Injecta dosing pump is used in various industries such as chemical, pharmaceutical, water purification, cooling towers, etc. Injecta dosing company produces its pumps for 4 different industrial applications, water purification, swimming pool and disinfection.
Dosing pump , metering pump or injection pump is a type of positive displacement pumps that is used to pump fluids with a specific flow and adjustable with different pressures to tanks and pipelines. The dosing pump works in such a way that in each working course, a certain volume of fluid is drawn from inside a calibrated chamber and then in the return course, this material (fluid) is injected into the system. ATHENA series Dosing injector are diaphragm pumps that have a PVDF pump head and a PTFE diaphragm. PVDF is a relatively new recycled plastic, the most important feature of which is its high chemical resistance. Among the properties of this material, the following can be mentioned:

• Has high chemical properties and is made of fluoropolymers
Better mechanical properties such as tensile stress and higher compressive strength than other PTFEs
• High resistance at low and high temperatures up to 150 ° C
• Low friction coefficient and abrasion resistance
• Low flammability
• FDA certified by the US Food and Drug Administration

 

 

What is a dosing pump?

Dosing pump , metering pump or injection pump injects a certain volume or dose of fluid and chemical in a certain period of time and with a certain flow rate in the system. Dosing pumps have two types of diaphragms and pistons that are most used for injecting chemicals, solutions and other fluids.
Injection pumps are used in industries such as chemical, food, pharmaceutical, petrochemical, textile and electronics. Dosing pumps are also used in wastewater treatment systems and desalination plants .
The flow rate of an injection pump or dosing pump can be adjusted in two ways. To do this, the user can change the distance at which the diaphragm or piston is moving. Changing the course of the piston or diaphragm can also be done manually or digitally using the length of the stroke.

Technical specifications and features of INJECTA 5-8 dosing pump

characteristics of the ATHENA series injector pump (5 liters – 8 bar) are as follows:

• Diaphragm pump type
• For use in water treatment and chemical industries
• Has a PTFE diaphragm and is resistant to chemicals
• Has a PVDF head and a ceramic ball
• Has a 2 to 16 digit display
• With the ability to adjust the flow or volume of water flow
• Has an electric motor with protection code IP65
• Has a voltage of 220 volts
• Has a frequency of 50 Hz
• Ability to program in 5 different languages

Technical specifications of INJECTA 5-8 injection pump

Technical specifications of INJECTA 5-8 ATHENA series injection pump include the information in the following table:

 

Dubai (liters per hour)	Pressure (load)	Power	Voltage	Diaphragm material	Frequency	Pump head material
5	8	14 Watts	220 volts	PTFE	50 Hz	PVDF

 

Different applications of INJECTA dosing pump

• To pump chemicals to adjust the pH
• Anti-scaling pumping to prevent the formation of scale in RO devices
• Injection of polyphosphate to get water hardness
• Female chlorine pump pool
• Injection of aluminum sulfate and aluminum sulfate hydroxide for coagulation
• And …

Important points for installing INJECTA dosing pump

Observing the following to install and use the injector dosing pump will help increase the efficiency of the system and the dosing pump used:

1- The working pressure of the pump must always be at least 10% more than the pressure of the injection site.
2- Install the foot valve in the tank and the injection valve at the injection point.
3- Be sure to do the initial ventilation in the first stage.
4- Installation in a suitable place
5- Open the suction and drain valve on the header only for replacement.
6- Install the suction valve and drain on the header bowl according to the direction of the arrow sign.
8- If the pump is off for a long time, be sure to wash the suction path as well as the pump connections.
8- Always adjust the pump when it is on.

Is the INJECTA 5-8 dosing pump suitable for me?

This dosing pump of ATHENA series has a flow rate of 5 liters per hour and a pressure of 8 bar. It is used for chemical injection, chlorine injection, anti-scalant in RO systems, injection of anti-fouling and corrosion in water and wastewater treatment systems and various industries. This dosing pump is mostly used in chemical industry and for water and wastewater treatment. Dosing pump INJECTA 5-8 ATHENA series is a diaphragm pump that can be used to inject fluids and chemicals.

 

 

 

 

 

 

 

 

 

 

INJECTA pump metering

INJECTA dosing pump INJECTA is one of the best acid, chlorine injection pumps and is very practical. One of the most famous Italian companies in the field of chlorination pump, dosing chlorination pump, aquarium, small, acid, diaphragm, piston, DOSING PUMP is INJECTA pump company. INJECTA company was established in previous decades and started to produce various types of dosing pumps with different flow and size.

This Italian company has valid international standards and has a large number of agencies around the world such as: Brazil, France, Russia, USA and.. dosing pump INJECTA is one of the most famous dosing pumps in the world and has excellent quality and reasonable price. Injecta company has ISO 9001, ISO 14001, SA8000 standards.

 

The official sales agent of INJECTA dosing pump

Taheran Sanat Koosha Co. is the official sales agent of various types of chlorine injection pumps, chlorination pumps, metering pumps, dosing pumps, INJECTA , and also in the field of consulting, supply, sale of various dosing pumps JESCO , ANTECH, Grandfoss Aldoz , AtatronJ , Injecto SEKO , AQUA AQUA is active and serves its valued customers.

Please contact the experts of Senaco to register your order and inquire about the price. INJECTA dosing pump provided by Senaco company has excellent quality and reasonable price and will be sent to serve our esteemed customers as soon as possible. Senaco also sells stock dosing pumps, Iranian dosing pumps, Isfahan dosing pumps and..

 

INJECTA Italian Injection Pump Catalog

• Download INJECTA pump dosing catalog

What is an injectable dosing pump and how does it work?

Italian pump metering is suitable for injecting a variety of chemicals, chlorine, acid with low viscosity and is used in various industries such as: water treatment, petrochemical, pharmaceutical, medical and.. Based on the pumped fluid, the pump head material can be Teflon, PVC, PVDF, steel.

The two most important parameters are pressure and flow, and the selected pressure must be higher than the system pressure. Tehran Sanat Koosha Company is active in the field of consulting various industrial equipments and contact the company’s experts to receive advice.

Types of dosing pump INJECTA (injection pump)

• Injector diaphragm pump
• INJECTA industrial dosing pump
• Injectable disinfection pump dosing
• Chlorination pump for water purification
• Dosing pump INJECTA pool
• ATHENA series injector dosing pump
• Dosing pump INJECTA OLIMPIA series
• NIKE series injector dosing pump

Technical specifications of dosing pump, INJECTA ATHENA BX series chlorination

• The ATHENA series is a diaphragm type.
• ATHENA series for use in water treatment and chemical industries
• ATHENA series has a PTFE diaphragm and is resistant to chemicals
• It has a PVDF head and a ceramic ball
• It has a flow rate of 0.4 to 50 liters per hour
• It is digital and analog.
• Ability to program in 5 different languages
• Has a 2 to 16 digit display
• Has the ability to adjust the flow rate
• Has an electric motor with protection code IP65
• Has a working pressure of up to 20 times
• Has a voltage of 220 volts
• Has a frequency of 50 Hz

Profile of ATHENA 1

Dubai	Pressure	CC/STROKE	Connection size	STROKES/MIN.	Power	Weight
2,5 l/h	20 bar	0,35	4×6 – 4×7	120	14 watt	3 kg
3 l/h	18 bar	0,42	4×6 – 4×7	120	14 watt	3 kg
4,2 l/h	14 bar	0,58	4×6 – 4×7	120	14 watt	3 kg

Profile of ATHENA 2

Dubai	Pressure	CC/STROKE	Connection size	STROKES/MIN.	Power	Weight
3 l/h	12 bar	0,31	4×6	160	14 watt	3 kg
4 l/h	10 bar	0,42	4×6	160	14 watt	3 kg
5 l/h	8 bar	0,52	4×6	160	14 watt	3 kg
8 l/h	2 bar	0,83	4×6	160	14 watt	3 kg

ATHENA 3 specifications

Dubai	Pressure	CC/STROKE	Connection size	STROKES/MIN.	Power	Weight
7 l/h	16 bar	0,39	4×6	300	28 watt	4 kg
10 l/h	10 bar	0,55	4×6	300	28 watt	4 kg
14 l/h	6 bar	0,78	4×6	300	28 watt	4 kg
16 l/h	2 bar	0,89	4×6	300	28 watt	4 kg

ATHENA 4 specifications

Dubai	Pressure	CC/STROKE	Connection size	STROKES/MIN.	Power	Weight
30 l/h	5 bar	1,67	8×12	300	28 watt	4 kg
40 l/h	4 bar	2,22	8×12	300	28 watt	4 kg
55 l/h	2 bar	3,05	8×12	300	28 watt	4 kg
110 l/h	0,1 bar	6,11	8×12	300	28 watt	4 kg

Technical specifications of dosing pump, INJECTA OLIMPIA series chlorination

• The OLIMPIA series is a very strong and quiet electromagnetic type.
• OLIMPIA series for use in industries that require a constant flow.
• OLIMPIA series is resistant to acid and combustion.
• It has a PVDF head and a ceramic ball
• It has a flow rate of 0.2 to 5 liters per hour
• It has a power of 14 watts.
• Has the ability to adjust the flow rate
• Has an electric motor with protection code IP65
• Has a working pressure of up to 7 times
• Has a voltage of 220 volts
• Has a frequency of 50 Hz

Low profile LOW NOISE, low flow LOW FLOW, model BP

Dubai	Pressure	Connection size	STROKES/MIN.	Power
0.6	7	4*6	100	14 WATT
5	5	4*6	160	14 WATT
2	7	4*6	100	14 WATT
0.2	1	4*6	20	14 WATT

Technical specifications of INJECTA NIKE series

• NIKE series is a type of peristaltic injection pump for fluid injection.
• NIKE series has the ability to control by computer
• NIKE series is resistant to acid and combustion.
• It has a PVDF head and a ceramic ball
• It has a flow rate of 1.5 to 25 liters per hour
• It has a power of 14 watts.
• Has the ability to adjust the flow rate
• It has an electric motor with protection code IP65 and anti-combustion and anti-acid.
• Has a working pressure of 0.1 to 6 bar
• Has a voltage of 220 volts
• Has a frequency of 50 Hz
• Has anti-fouling and anti-algae properties and has a remote alarm
• Has the ability to transfer solvents, soda, oil, anti-scalant, caustic, gasoline and…

Pressure (load)	Dubai (ml per hour)
2	1.5
1.5	15.1
1.5	151.2
1.5	540
1.5	975

Dosage specifications of INJECTA motorized chlorination pump

models	Ø PISTONS	STROKES/min	Dubai	SS316 pressure	PVC pressure	Connection	Weight SS316	PVC weight
			Three-phase 0.18 kW		Single phase 0.25 kW
TP15006A	6 mm	58	1,5 lt/h	20 bar	10 bar	1/4” g.f.	9,8 kg	8,4 kg
TP15006C	6 mm	116	3,0 lt/h	20 bar	10 bar	1/4” g.f.	9,8 kg	8,4 kg
TP15011A	11 mm	58	5,0 lt/h	20 bar	10 bar	1/4” g.f.	9,8 kg	8,4 kg
TP15011C	11 mm	116	10,0 lt/h	20 bar	10 bar	1/4” g.f.	9,8 kg	8,4 kg
TP15017A	17 mm	58	11,0 lt/h	20 bar	10 bar	3/8” g.f.	9,8 kg	8,4 kg
TP15017C	17 mm	116	22,0 lt/h	20 bar	10 bar	3/8” g.f.	9,8 kg	8,4 kg
TP15025A	25 mm	58	25,0 lt/h	20 bar	10 bar	3/8” g.f.	9,8 kg	8,4 kg
TP15025C	25 mm	116	50,0 lt/h	20 bar	10 bar	3/8” g.f.	9,8 kg	8,4 kg
			Three-phase 0.25 kW		Single phase 0.37 kW
TP15030A	30 mm	58	35,0 lt/h	20 bar	10 bar	3/8” g.f.	11,2 kg	9,8 kg
TP15030C	30 mm	116	70,0 lt/h	20 bar	10 bar	3/8” g.f.	11,2 kg	9,8 kg
TP15038A	38 mm	58	55,0 lt/h	17 bar	10 bar	3/8” g.f.	12,8 kg	10,0 kg
TP15038C	38 mm	116	110,0 lt/h	17 bar	10 bar	3/8” g.f.	12,8 kg	10,0 kg
TP15048A	48 mm	58	85,0 lt/h	10 bar	10 bar	1/2” g.f.	12,8 kg	10,0 kg
TP15048C	48 mm	116	170,0 lt/h	10 bar	10 bar	1/2” g.f.	12,8 kg	10,0 kg
TP15054A	54 mm	58	110,0 lt/h	8 bar	8 bar	1/2” g.f.	14,6 kg	10,3 kg
TP15054C	54 mm	116	220,0 lt/h	8 bar	8 bar	1/2” g.f.	14,6 kg	10,3 kg
TP15064A	64 mm	58	152,0 lt/h	6 bar	4 bar	3/4” g.f.	15,7 kg	10,5 kg
TP15064C	64 mm	116	304,0 lt/h	6 bar	4 bar	3/4” g.f.	15,7 kg	10,5 kg

Model	Ø PISTONS	STROKES/min	Dubai	SS316 pressure	PVC pressure	Connection	Weight SS316	PVC weight
			Three-phase 0.18 kW		Single phase 0.25 kW
TP25025A	25 mm	58	40,0 lt/h	20 bar	10 bar	3/8” g.f.	15,5 kg	14,1 kg
TP25025C	25 mm	116	80,0 lt/h	20 bar	10 bar	3/8” g.f.	15,5 kg	14,1 kg
TP25030A	30 mm	58	55,0 lt/h	20 bar	10 bar	3/8” g.f.	15,5 kg	14,1 kg
TP25030C	30 mm	116	112,0 lt/h	20 bar	10 bar	3/8” g.f.	15,5 kg	14,1 kg
			Three phases 0.37 kW		Single phase 0.55 kW
TP25038A	38 mm	58	90,0 lt/h	20 bar	10 bar	1/2” g.f.	18,4 kg	15,6 kg
TP25038C	38 mm	116	280,0 lt/h	20 bar	10 bar	1/2” g.f.	18,4 kg	15,6 kg
			Three phase 0.55 kW		Single phase 0.75 kW
TP25048A	48 mm	58	140,0 lt/h	20 bar	10 bar	1/2” g.f.	18,4 kg	15,6 kg
TP25048C	48 mm	116	284,0 lt/h	20 bar	10 bar	1/2” g.f.	18,4 kg	15,6 kg
TP25054A	54 mm	58	180,0 lt/h	15 bar	10 bar	1/2” g.f.	20,2 kg	15,6 kg
TP25054C	54 mm	116	365,0 lt/h	15 bar	10 bar	1/2” g.f.	20,2 kg	15,6 kg
				Three-phase 0.75 kW
TP25064A	64 mm	58	250,0 lt/h	10 bar	10 bar	3/4” g.f.	21,3 kg	16,1 kg
TP25064C	64 mm	116	505,0 lt/h	10 bar	10 bar	3/4” g.f.	21,3 kg	16,1 kg
TP25076A	76 mm	58	365,0 lt/h	7 bar	7 bar	1” g.f.	28,2 kg	18,2 kg
TP25076C	76 mm	116	730,0 lt/h	7 bar	7 bar	1” g.f.	28,2 kg	18,2 kg
TP25089A	89 mm	58	495,0 lt/h	5 bar	5 bar	1” g.f.	30,4 kg	18,6 kg
TP25089C	89 mm	116	1000,0 lt/h	5 bar	5 bar	1” g.f.	30,4 kg	18,6 kg

To get the rest of the models, please refer to the device catalog.

Application of INJECTA injection pump (injection pump)

• Metering pump (injection pump) Pumps the material to adjust the pH
• Metering pump (injection pump) Pumping water of Jwal or Vatix or sodium hypochlorite for disinfection inside pipelines
• Dosing pump for pumping aluminum sulfate and aluminum sulfate hydroxide for coagulation
• Anti-scaling pumping to prevent fouling in the RO system
• Acid and base pumping to control pH
• Pumping of potassium permanganate to remove manganese and iron in the treatment system
• Pumping polyphosphate to get water hardness
• Pumping sodium biosulfate to eliminate water-soluble oxygen
• Pumping baking soda or caustic soda to absorb harmful cyanide and water-soluble metals
• (Injection pump) Sulfuric and nitric acid pumping to adjust the pH
• (Injection pump) Pumping paint to gasoline
• Injection pump Pumping alcohol to gasoline
• Dosing pump pumping anti-foam material
• Pool chlorine pump

 

Price list of dosing pump, INJECTA chlorination

Row	to explain	Price (Tomans)
1	INJECTA air pump price	2.000.000
2	Dosage price of Injecta industrial pump	2.200.000
3	INJECTA disinfection dosing price	2.300.000
4	Dosage price of injectable water purifier pump	2.400.000
5	Dosage price of injectable pool pump	2.500.000
6	Price of ATHENA series injector metering pump	2.600.000
7	Price of OLIMPIA series injector metering pump	2.700.000
8	Price of INJECTA INJECTA NIKE series	2.800.000

All prices can be changed without prior notice, please contact the sales department for the latest prices.

 

 

 

 

 

 

 

 

 

 

 

Selling dosing pump Injecta Italy

Dosing pumps have the ability to accurately inject a fluid that is produced in diaphragm, piston and mono models. The dosing stimulator of the pumps is of solenoid or motor type.

In injectable dosing pumps, the flow adjustment can be adjusted digitally and analog, which can be provided in different materials.

Injection pump price list

Dear visitor, if you visit this page with mobile, please drag the image to the left or right to see the full tables, while you are on the tables (some tables may not be fully displayed on your screen due to their size, also You can hold your phone horizontally to see the tables better.).

Technical Specifications

Technical specifications of injectable pump dosing

Introducing different types of injection pump or dosing pump Injecta

HYDRA 200 series injector dosing pump

• Dubai: Manual adjustment from 0 to 100%
• Voltage range: 100 to 240 volts
• Frequency: 60/50 Hz
• Has a solenoid stimulator, PVDF head
• Ceramic ball, Teflon diaphragm
• PVC suction pipe and drain
• Degree of protection IP65

 

Technical specifications of HYDRA 200 injection pump

Flow and pressure of HYDRA 200 injection pump

Dubai L / h	3	3.8	5	7.5	8.3	9.1	10
Pressure (load)	10	9	8	6	3	2	1

Specifications of HYDRA 200 injection pump

Model	Impact (Cc)	Impact (minutes)	Telecom	the power	Dimensions	Weight
Hydra 200	0.52	160	6 × 4 mm	230 W, 50 Hz, 14 W, IP65	190.5×92×135	3 kg

Athena APBX series injector pump metering

• Dubai: Manual adjustment from 0 to 100%
• Voltage range: 100 to 240 volts
• Frequency: 60/50 Hz
• Has a solenoid stimulator, PVDF head
• Ceramic ball, Teflon diaphragm
• PVC suction pipe and drain
• Degree of protection IP65

 

Technical specifications of dosing pump Injecta Athena APBX series

Technical specifications of Injecta Athena APBX series injection pump

Model	Dubai L / h	Pressure (load)	Impact (Cc)	Impact (minutes)	Connections (mm)	the power	Weight (kg)
APBX 1	1.5	20	1.21	120	4/6-4/7	230W, 50Hz, 14W, IP65	3
	2	18	0.28	120	4/6-4/7
APBX 2	3	12	0.31	160	4/6
	4	10	0.42	160	4/6
	5	8	0.52	160	4/6
	8	2	0.83	160	4/6
APBX 3	7	16	0.39	300	8/12	230W, 50Hz, 28W, IP65	4
	10	10	0.55	300	8/12
	14	6	0.78	300	8/12
	16	2	0.89	300	8/12
APBX 4	20	5	1.11	300	8/12
	22	4	1.22	300	8/12
	35	2	1.94	300	8/12
	50	1	2.78	300	8/12

* Dimensions of all models of injectable pump pump APBX 238 × 147.5 × 125

Athena APPR series injection pump

• Dubai: From 0 to 100%
• PH: From 0 to 14 volts
• Has a PVDF head
• Ceramic ball, Teflon diaphragm
• Has an LCD screen
• Output 4 to 20 mA
• PVC suction pipe and drain
• Degree of protection IP65
• Digital dose proportional to Rx / Ph

 

Technical specifications of Athena APPR series injector pump dosing

Technical information of dosing pump Injecta Athena APPR series

Model	Dubai L / h	Pressure (load)	Impact (Cc)	Impact (minutes)	Connections (mm)	Weight (kg)
APPR 1	1.5	20	1.21	120	4/6-4/7	3
	2	18	0.28	120	4/6-4/7
APPR 2	3	12	0.31	160	4/6
	4	10	0.42	160	4/6
	5	8	0.52	160	4/6
	8	2	0.83	160	4/6
APPR 3	7	16	0.39	300	8/12	4
	10	10	0.55	300	8/12
	14	6	0.78	300	8/12
	16	2	0.89	300	8/12
APPR 4	20	5	1.11	300	8/12
	22	4	1.22	300	8/12
	35	2	1.94	300	8/12
	50	1	2.78	300	8/12

* Dimensions of all models of injectable pump APPR 238 × 147.5 × 125

TAM series injector diaphragm injection pump

• Flow rate: from 0 to 460 liters per hour, manual adjustment from 0 to 100%
• Pressure: up to 10 times
• Power: from 0.09 kW to 0.37 kW
• Has electric motor drive, head PP – PVDF – SS316
• Ceramic ball, Teflon diaphragm
• Output 4 to 20 mA
• PVC suction pipe and drain
• Degree of protection IP55
• Flow and high pressure with great accuracy
• Transfer of viscous fluids containing solid particles

 

Technical specifications table of Injecta Athena TAM series diaphragm pump metering

Technical specifications of Athena TAM injector pump metering

Model	Diaphragm diameter	Impact (minutes)	Maximum flow L / h	Pressure (load)	Connections (inches)	Power (kW)	Weight (kg)
TAM050G	50	160	60	5	3/4	0.09	4.5
TAM4108116	108	116	120	10	3/8	0.37	10.1
TAM613878	138	78	220	7	3/4	0.37	12.3
TAM6138116	138	116	310	7	1	0.37	12.3
TAM6165116	165	116	460	5	1	0.37	13.2

TAP series injector piston dosing pump

• • Flow: From 0 to 1000 liters per hour
  • Pressure: up to 20 bar
  • Power: from 0.18 kW to 0.75 kW

• With electric motor drive, SS316 head withstands temperatures up to 90 ° C and PVC up to 40 ° C
• PVC and ceramic piston, SS316 ceramic valve and seat, Whitney seal
• Output 4 to 20 mA
• Degree of protection IP55
• Flow and high pressure with great accuracy

 

Technical specifications of dosing pump injector pump TA series

Technical information of Injecta TA piston pump dosing

Model	Piston (mm)	Impact (minutes)	Flow L / h	Pressure (load)		Connections (inches)	Power (kW)		Weight (kg)
				SS316	PVC		I FIT	III PH
TAP153078	30	78	45	20	10	3/8	0.37	0.25	11.2
TAP153858	38	58	55	17	10	3/8	0.37	0.25	12.8
TAP154858	48	58	85	10	10	1/2	0.37	0.25	12.8
TAP154878	48	78	114	10	10	1/2	0.37	0.25	12.8
TAP1548116	48	116	170	10	10	1/2	0.37	0.25	12.8
TAP255458	54	58	180	15	10	1/2	0.75	0.55	20.2
TAP255478	54	78	242	15	10	1/2	0.75	0.55	20.2
TAP256478	64	78	335	10	10	1/2	N.A	0.75	21.3
TAP2564116	64	116	505	10	10	3/4	N.A	0.75	21.3
TAP2576116	76	116	730	7	7	1	N.A	0.75	28.2
TAP2589116	89	116	1000	5	5	1	N.A	0.75	30.4

Application of injectable pump dosing

1. Pharmaceutical industry
2. Chlorination to drinking water
3. Antiscalant for descaling in RO systems
4. Chlorination of pool water
5. Polyelectrolyte injection into wastewater
6. Lime milk to control pH and many other uses

 

Advantages of injectable pump dosing

Dosing pumps are produced in various materials and mechanisms.
These pumps can be produced in materials: polypropylene (PP), kainar (PVDF), steel 316, 316L, 304.

 

Injecta pump dosing history

The Italian company Injecta is world-famous with more than forty years of experience in manufacturing various types of injection pumps. Using its capabilities, the company has been able to produce its injection pumps in various materials that meet the wide needs of injection pump users.

 

Injecta pump dosing price list

Sorry, all prices are being updated, please contact the sales department to inquire about the purchase price.

Dosage price of injectable pump

Row	to explain	Price in Tomans
1	Dosing price of Injecta HYDRA 200 solenoid pump	Call
2	Dosing price of Injecta APBX Athena solenoid pump	Call
3	Dosage price of APPR Athena injector solenoid pump	Call
4	Injectable motor diaphragm pump dosing price TAM	Call
5	TAP model injector motor pump metering price TAP	Call